Fig. 01
Electric linear actuator
YMD608P
Heavy-duty IP66 actuator with up to 12,000 N load, 6.5–38 mm/s speed, stroke up to 1,000 mm and 480-hour salt-spray resistance.
Fig. 02 — Specification
Specifications
YMD608P Industrial Linear Actuator
Designed for harsh industrial environments, providing high force, long stroke and enhanced corrosion protection.
General Specifications
- Maximum load: 12,000 N; self-locking force: 15,000 N
- Stroke: 50–1,000 mm; speed: 6.5–38 mm/s
- IP66; 480-hour salt-spray test
- Built-in limit switches; optional Hall or potentiometer feedback
- Temperature: 0°C to 40°C; optional −20°C to 65°C or −40°C to 65°C
- Noise ≤75 dB; duty cycle 20%; 12/24/36/48 V
- Optional mechanical clutch or electronic overload protection
Performance Data
| Code / Ratio | No-load / Full-load Speed (mm/s) | Load / Self-locking (N) |
|---|---|---|
| A / 40:1 | 6.5 / 4.5 | 12,000 / 15,000 |
| B / 30:1 | 8.5 / 6 | 11,000 / 12,000 |
| C / 20:1 | 13 / 9 | 7,500 / 9,000 |
| D / 40:1 | 13 / 7 | 10,000 / 12,000 |
| E / 30:1 | 17 / 9.5 | 7,000 / 8,000 |
| F / 20:1 | 25 / 14 | 5,000 / 6,000 |
| G / 40:1 | 20 / 11 | 6,500 / 8,000 |
| H / 30:1 | 25 / 13 | 4,500 / 5,500 |
| I / 20:1 | 38 / 24 | 3,200 / 4,000 |
Installation Dimensions
L=S+190 for 50–300 mm strokes; S+250 for 300–600 mm; S+300 for 600–1,000 mm. Extended length A=L+S.
Feedback and Accessories
Hall sensing can be mounted on the PCB or motor shaft, with one or four pole pairs and 90° phase difference. Hall supply: 3.3–24 V. Optional 5 kΩ or 10 kΩ potentiometer. Brackets and manual crank are available.
